-
Config.sys Documentation Project
- About
- Basedev
- Call
- Device
- Ifs
- OS/2 Commands
- Run
- Set
- Programs
- Hardware
- OS/2 Components
|
|
Provides support for your parallel ports LPT1, LPT2 and LPT3 on PCs with ISA or PCI buses.
BASEDEV=Print01.sys parameter
Parameter:
-
/IRQ
This parameter change the transmission method from polling to interrupt. The interrupt method is faster but won't work on every system.
The used IRQ depends on the I/O address the LPT-port uses. IRQ 5 is used on LPT ports installed on the I/O address 278, IRQ 7 is used on LPT ports installed on the I/O address 378 or 3BC. To find out the I/O address of a LPT port use the Hardware-Manager.
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 |
| Yes | Yes | Yes |
| Basedev Statements | |||
| Parallel port drivers | |||
|