• Home
• My Programs

Config.sys Documentation Project
• About
• Basedev
• Call
• Device
• Ifs
• OS/2 Commands
• Run
• Set
• Programs
• Hardware
• OS/2 Components

• Links
• Forum
• Guestbook
• Contact me

This statement sets up the buffer size of your parallel ports LPT1 up to LPT3. Usualy you have your printer connect on one of this ports. A higher buffer size can speed up your printer. The best thing you can do, is to set the port (or Ports) you are use, to the maximum value. Set the other ports to the minimum value.

PRINTMONBUFSIZE=x1,x2,x3

Default settings:

• PRINTMONBUFSIZE=134,134,134

Parameters:

X can be in the range from 134 to 2048 .
X1 is the buffer size of the first parallel port LPT1.
X2 is the buffer size of the second parallel port LPT2.
X3 is the buffer size of the third parallel port LPT3.

You must set up all three parameters, no matter how much parallel ports you have in your PC.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0
Yes	Yes	Yes